Atlas TTC305A Truck Tire Changer + WBT-210 Heavy Duty Wheel Balancer Combo

TO COMPARE TRUCK TIRE CHANGERS, CLICK HERE This Combo Package includes the Atlas® TC305A truck tire changer and the the heavy duty computerized Atlas® WBT-210 wheel balancer. The Atlas® TC305A automatic truck tire changer is designed and engineered to handle rim bore sizes from 8 inches to 26 inches and tire diameters in excess of 55 inches. The fully automatic Atlas® TC305A truck tire changer can easily accommodate tires with a maximum width of 30 1/2 inches. This automatic truck tire changer is the result of a joint venture between a very prestigious Italian wheel service manufacturer and the most well respected wheel service equipment manufacturer in Asia. The Atlas® WBT-210 is the perfect wheel balancer for those shops that want one balancer that can balance a 14-inch steel rim up to and including a 300-pound semi-truck tire. There are many large (32 inch) custom wheels and over-sized “gumbo-mudders” that can easily be balanced on the Atlas® WBT-210 computer wheel balancer. The Atlas® WBT-210 is the perfect computer spin balancer for those trucking companies that operate everything from passenger cars to light trucks to over the road semi tractor/ trailer rigs. The 40 mm heavy duty shaft accommodates the standard mounting cones for most cars and pickup trucks. There are several large truck adapters included with the package that will allow the operator to mount and balance most BUDD style wheels. TTC305A Fully Automatic Truck Tire Changer Handles rims from 8″ to 26″ and tire diameters in excess of 55″ Accommodates tires with a max width of up to 30 1/2″ Automatic movement and positioning of Bead Tool, Carriage, & Chuck Arm Bead Breaker Interchangeable Mount/Demount and Roller Heads Electric/Hydraulic Self-Centering Four Jaw Chuck 5 different rim locking positions Mounted Control Unit w/ additional Foot Pedal Controls Heavy Duty Tire Tool Included Rim Clamps for Steel and Alloy Wheels Included Alloy Rim Adapter Set w/ Plastic Inserts Included 1 Year Parts Only Warranty WBT-210 Computer Controlled Heavy Duty Spin Balancer Cone sets for car and light truck tires Cone and spacer set for truck, bus, or implement tires Plastic Quick Release Nut included Heavy duty steel wing nut included Pneumatic wheel lift (external air supply required) Automatic start/stop when hood is lowered/raised. Static and dynamic balancing modes. Rapid optimization (OPT) Self-diagnosis Self-calibration Exceptional stability in reading the unbalance between planes Display in grams or ounces, and in mm or inches Wheel Weight Pliers Included Wheel Width Calipers Included Replacement Parts & Wear Items Always in Stock 1 Year Parts Only Warranty Atlas® TTC305A Specifications Rim Clamping Range 13″ – 26″ Minimum Clamping Size W/ Alloy Adapters 8″ Max Wheel Weight 838 lbs. Max Tire Diameter 55″ Max Tire Width 30 1/2″ (2′ 6 1/2″) Clamping Power 6,600 lbs. Operating Pressure 0-1885 PSI Acoustic Pressure <70dBA Bead Breaker Force 3990 lbs. Tool Arm Positioning Automatic Tool Head Positioning Automatic Construction Single Piece Frame w/ Solid Floor Plate Hydraulic Motor Power 2 HP, 220v (+/- 5% 209-231 volts) 1phase, 30 amp breaker required Chuck Motor Power 3 HP, 220v (+/- 5% 209-231 volts) 1phase, 30 amp breaker required Shipping Weight 1,490 lb. Atlas® WBT-210 Specifications Max Tire Diameter 47″ Rim Sizes (Cars And Light Trucks) 10″-32″ Rim Width 1 1/2″-20″ Shaft Size 40mm Max. Wheel Weight 440 lbs. Balancing Speed 150 rpm Car-Light Truck Mode/90 rpm Truck Mode Data Entry All Dimensions Manual Entry Measurements Standard Or Metric Accuracy 1 gram Car-Light Truck Mode/10 gram Truck Mode Weight Position Resolution 1.4 Degrees Self Calibration Yes Motor 1/3 HP Air Requirement 115-140 PSI (MUST NOT EXCEED 140 PSI) Power Supply 220volt +/- 5% (209-231 volts) 1phase, 30 amp breaker required Shipping Weight 725 lbs

Key features

• Fully Automatic Truck Tire Changer
• Handles rims from 8″ to 26″ and tire diameters in excess of 55″
• Accommodates tires with a max width of up to 30 1/2″
• 5 different rim locking positions
• Heavy Duty Tire Tool Included
• Rim Clamps for Steel and Alloy Wheels Included
• Alloy Rim Adapter Set w/ Plastic Inserts Included
• 1 Year Parts Only Warranty
• Cone sets for car and light truck tires
• Plastic Quick Release Nut included
• Heavy duty steel wing nut included
• Pneumatic wheel lift (external air supply required)
• Automatic start/stop when hood is lowered/raised
• Display in grams or ounces, and in mm or inches
• Wheel Weight Pliers Included
• Wheel Width Calipers Included
• Atlas® TTC305A Specifications
• Rim Clamping Range 13″ – 26″
• Minimum Clamping Size W/ Alloy Adapters 8″
• Max Wheel Weight 838 lbs
• Max Tire Diameter 55″
• Max Tire Width 30 1/2″ (2′ 6 1/2″)
• Clamping Power 6,600 lbs
• Operating Pressure 0-1885 PSI
• Acoustic Pressure <70dBA
• Bead Breaker Force 3990 lbs
• Construction Single Piece Frame w/ Solid Floor Plate
• Hydraulic Motor Power 2 HP, 220v (+/- 5% 209-231 volts) 1phase, 30 amp breaker required
• Chuck Motor Power 3 HP, 220v (+/- 5% 209-231 volts) 1phase, 30 amp breaker required
• Shipping Weight 1,490 lb
• Atlas® WBT-210 Specifications
• Max Tire Diameter 47″
• Rim Sizes (Cars And Light Trucks) 10″-32″
• Rim Width 1 1/2″-20″
• Shaft Size 40mm
• Max. Wheel Weight 440 lbs
• Balancing Speed 150 rpm Car-Light Truck Mode/90 rpm Truck Mode
• Accuracy 1 gram Car-Light Truck Mode/10 gram Truck Mode
• Weight Position Resolution 1.4 Degrees
• Motor 1/3 HP
• Air Requirement 115-140 PSI (MUST NOT EXCEED 140 PSI)
• Power Supply 220volt +/- 5% (209-231 volts) 1phase, 30 amp breaker required
• Shipping Weight 725 lbs
• additional_properties: {}
• source_options: []
• minimum_purchase_quantity: 0
• maximum_purchase_quantity: 0

Product specifications

• Rim Clamping Range: 13″ – 26″
• Minimum Clamping Size W/ Alloy Adapters: 8″
• Max Wheel Weight: 838 lbs
• Max Tire Diameter: 47″
• Max Tire Width: 30 1/2″ (2′ 6 1/2″)
• Clamping Power: 6,600 lbs
• Operating Pressure: 0-1885 PSI
• Acoustic Pressure: <70dBA
• Bead Breaker Force: 3990 lbs
• Tool Arm Positioning: Automatic
• Tool Head Positioning: Automatic
• Construction: Single Piece Frame w/ Solid Floor Plate
• Hydraulic Motor Power: 2 HP, 220v (+/- 5% 209-231 volts) 1phase, 30 amp breaker required
• Chuck Motor Power: 3 HP, 220v (+/- 5% 209-231 volts) 1phase, 30 amp breaker required
• Shipping Weight: 725 lbs
• Rim Sizes (Cars And Light Trucks): 10″-32″
• Rim Width: 1 1/2″-20″
• Shaft Size: 40mm
• Max. Wheel Weight: 440 lbs
• Balancing Speed: 150 rpm Car-Light Truck Mode/90 rpm Truck Mode
• Data Entry: All Dimensions Manual Entry
• Measurements: Standard Or Metric
• Accuracy: 1 gram Car-Light Truck Mode/10 gram Truck Mode
• Weight Position Resolution: 1.4 Degrees
• Self Calibration: Yes
• Motor: 1/3 HP
• Air Requirement: 115-140 PSI (MUST NOT EXCEED 140 PSI)
• Power Supply: 220volt +/- 5% (209-231 volts) 1phase, 30 amp breaker required
• SKU: ATETTCWB-COMBO2-FPD
• UPC: ATETTCWB-COMBO2-FPD
• Availability: FACTORY SHIPPED
• Shipping: Free Shipping
• Condition: NewCondition
• Warranty: ATLAS Equipment Sales offers a one year LIMITED structural parts warranty on all Atlas wheel balancers. Atlas Equipment Sales warrants the equipment to the original purchaser against defects in material or workmanship under normal use for a period of one year from the date of purchase. This limited warranty shall be limited to the repair or replacement of materials or parts found defective, at the discretion of Atlas Equipment Sales. Electrical component parts carry a 90 day warranty. Motors carry a one year warranty. We stock a complete parts inventory and employ several full time technical advisors that can “walk you through” any issues that may arise with your Atlas wheel balancer. . Our LIMITED warranty policy (one year parts only) does not include a labor warranty. Our products are sold at such a competitive price that Atlas Equipment cannot afford to send technicians into the field to repair the Atlas wheel balancers. We assume that the buyer of our wheel balancer is mechanically inclined or has employees that are mechanically inclined. Our wheel balancers are built with “plug and play” parts that make repairs very easy. This is the same philosophy that the Personal Computer Industry has used for many years. Our wheel balancers include a self calibration feature that makes daily calibration obsolete. We offer a toll free number ((239) 397-3421) for service and parts information. This toll free number is directed to Atlas Indianapolis, IN. location. The service and parts department is open from 8 am to 5 pm EST from Monday to Friday. The department is SOMETIMES open on Saturdays, subject to the availability of our service technicians. There are certain parts that are considered “wear items” and are NOT included in the one year warranty. Parts that have been subjected to abuse will NOT be considered for warranty. REPEAT: IF YOU ABUSE YOUR WHEEL BALANCER (LIKE PLUG A 110 VOLT CORD INTO A 220 VOLT OUTLET, USE YOUR WEIGHT HAMMER INSTEAD OF YOUR FINGERS TO ENTER PARAMETERS INTO THE KEYPAD, OR DRIVE YOUR CAR INTO THE SIDE OF THE BALANCER AND BEND THE SHAFT) THEN THE WARRANTY ON YOUR BALANCER IS VOID. If you think that a wheel balancer should perform flawlessly for many years WITHOUT a normal amount of maintenance; then do not buy our wheel balancer. You are living in a fantasy world. Our LIMITED warranty policy (one year parts) requires the alleged defective part to be returned to Atlas Equipment Sales (freight ppd.-customer pays the freight) BEFORE the replacement part can be sent out. If the defective part is an integral part of the machine, and the loss of this part will not allow the machine to work properly, Atlas Equipment Sales can waive the “normal” return policy in certain situations so there is minimal down time for the operator. If necessary Atlas Equipment Sales can charge the customer’s credit card for the replacement part when the part is shipped and then credit the amount of the part when the defective part is returned. To expedite a part replacement or exchange, the use of a digital photo is the best answer. If the customer will furnish Atlas Equipment Sales with digital photos that identify a broken part or some other issue; then our service techs may waive the need for an old part to be returned. The replacement part can be shipped the same day. A digital photo leaves nothing to the imagination. Our service technicians can only help if they are provided with the most accurate information. We encourage the use of digital photos to help speed the process. Atlas Equipment has a service department with an excellent reputation. The old adage that compares the attitude of the customer to the type of service received rings true for Atlas Equipment Sales. We sell quality products with very few warranty issues. When there is a warranty issue (or an out of warranty issue) we want to get the customer back in business as quickly as possible. A good attitude from the Atlas service technician coupled with a positive attitude from the customer will produce a satisfactory outcome for both parties. Returned goods must be authorized to be returned (in writing) by Atlas Equipment Sales and must be prepaid to a designated location. All returns are subject to a 15% handling/restocking charge. Returned goods must be in like-new condition complete with warranty and original shipping papers. If you have any questions about our products or warranties, please ask your sales representative